- Model: EVODISPLAY-POTANS
- Power Supply: 12V/24V/48V/110V/220V/380V
- Button: Single Speed / Double Speed
- Matching Feature: EXIST
- Origin: TURKEY
- User Manual:
Receiver Unit Features
- Operating Temperature: -45 to +85
- Plastic Body Structure: ABS
- Protection Class: IP65
- Supply Voltage: 12V/24V/48V/110V/220V/380V
- AC Operating Voltage: 90 AC- 265 AC
- DC Operating Voltage: 70 VDC- 350 VDC
- DC Optional: 7+12 VDC- 75 VDC
- Relay Response Time: 10 ms
- Relay Max. Current: 5 Amper / 250 Volt 3 Amper/30 Volt
- Relay Contacts: 5A 250VAC/30VDC
- Operating Frequency(ISM / SBT): 2.400 Ghz-2.483 Ghz
- Channel: 83
- Weight: 507 gr
- Size: 197*128*63 mm
Transmitter Unit Features
- Operating Temperature: -45 to +85
- Plastic Body Structure: PP/GFR30
- Protection Class: IP65
- Battery:(LR6(AA)1.5V / NiMH(AA)1.2V) x2 2XAA
- Average Battery Consumption:3VDC/13mA
- Battery Low Warning:EXIST (Red LED)
- Working Time with Fully Charged Battery:220 Hour (2 Batteries)
- Supply Voltage:3VDC
- Direct Current Electrical Power:39 mW
- Radio Frequency Power:+10 dBm / 10 mW
- Operating Frequency(ISM / SBT):2.400 Ghz-2.483 Ghz
- Channel:83
- Channel Gap:1 Mhz
- Command Response Time:20 ms
- Working Distance:100 meter
- Weight (Batteries Included):337 gr (2 Batteries)
- Size:184*65*44 mm
Remote control systems can be integrated with overhead cranes, gantry cranes, monorail cranes and all other systems. As a result, we have sales all over Turkey, both during the initial installation and in the supply of broken crane remote controls that you are currently using. Remote technical support is provided for the connection of these remote controls.
In general, cranes are suitable for carrying long and wide loads due to their intended use. In order to carry these loads safely, the operator personnel commanding the crane must be at a certain distance from the load being carried. Controls attached to the car are not suitable for personnel to move away from the load being carried. At this point, the need for remote control for cranes arises. The operating system of the remote controls is carried out by mounting the control receiver on the energy control panel of the crane and using the handle (transmitter) connected to the receiver with signals by the operator personnel. In this way, personnel ensures that the load is transported in a safe and controlled manner.